The dimensions of 65 inch LG TVs are approximately 144-146 cm in length and 82-84 cm in height without a stand, and if the stand is installed, 5-10 cm will be added to the height. According to LG’s official datasheet, the thickness of the 65-inch screen varies between 2.4 and 7 cm on average in different models. This number varies depending on the panel technology, the design of the back of the device and the internal audio system:
- OLEDs (eg C5, G5) with a thickness of less than 5 cm are ideal for wall mounting.
- At 3-4 cm thick, QNEDs strike a good balance between slim design and ventilation.
- UHD / NanoCell in economy models are thicker (6-7cm) which is more suitable for desktop installation.
According to RTINGS standards for 4K TV, the suitable viewing distance is between 2 and 2.7 meters, at a distance of 2 meters, about 40 degrees of the user’s field of view is covered, which provides a cinematic experience with a deep and rich image. The standard distance is 2.7 meters, which covers 30 degrees of the viewer’s viewing angle and prevents eye fatigue.
Based on the official information of various LG models in recent years (from the OLED, QNED and UHD series), the average dimensions of 65-inch TVs are as follows:
|
series |
Width without base (cm) |
Height without base (cm) |
Screen thickness (cm) |
Carton dimensions (cm) |
|---|---|---|---|---|
|
OLED (C / G /) |
≈ 144.1 |
≈ 82.6 |
≈ 2.4 to 4.6 |
≈ 160x95x20 |
|
QNED / MiniLED |
≈ 145.6 |
≈ 84 |
≈ 3.0 |
≈ 160x97x20 |
|
UHD/Nanocell |
≈ 145.5 |
≈ 84.1 |
≈ 6.8 |
≈ 158x95x16.2 |
The slight difference between the series is due to the design of the frame, the location of the speakers and the panel architecture. In OLED models, due to the elimination of the background light, the thickness of the upper part of the TV is sometimes less than 3 mm, but the lower part (where the driver and power supply board are located) reaches about 4 to 5 cm.
In contrast, the LED and QNED series are thicker due to the use of an independent backlight system (Full Array or Mini LED), but usually have better ventilation and heat management.
Table of Contents
Tips for installing a 65-inch TV
The dimensions of 65 inch TVs are suitable for medium to large spaces and can be installed in the living room or the main hall and can also be used in offices or commercial environments. Before installing the TV, you must make sure that you have enough space around the screen. For 65-inch screens, you need to use large tables, and usually you have to keep 10-15 cm of free space on the sides, tables that are about 150-180 cm long are suitable.
When installing a 65-inch TV on the wall, you must follow the standard height to get a suitable viewing experience. The global VESA standard for 65-inch LG TVs is usually between 300×200 and 400x300mm.
Before choosing a bracket, the following should be checked:
- The VESA value of the device is listed in the booklet or on the back of the panel.
- The bracket should be at least 1.5 times the weight of the TV have a bearing capacity.
- For installation height, the center of the screen should be at an approximate height 100 to 130 cm be placed from the ground
- For gypsum wall or kenaf, it is necessary to use special screws and back plates.
In the wall mounting of OLEDs, the thinness of the device makes the small alignment error quite visible; Therefore, accurate horizontal and vertical alignment is required before tightening the bracket.
Important points of buying a 65 inch LG TV
As we said, 65-inch TVs like LG 65UA8500 TV They are part of large screens, so consider the appropriate installation space for the device before buying. Interior decoration and furniture should be such that after installation, you have the right distance to watch TV and view the content with the right viewing angle. When installing on the wall, observe the appropriate height for the furniture, and when installing it standing (on a table), note that you should choose a TV table suitable for the width of the device and have access to the ports of the device. It is also recommended that you pay attention to the following article from the Baneh IT website:
65-inch TVs are used in many places, and you can count on the quality and resolution of 65-inch images from a space with dimensions of 40 to 80 meters. The dimensions of 65-inch TVs are 144 x 81 cm and the diameter is about 165 cm. The manufacturers of these products have declared the standard distance to this screen to be 2.8 meters. Of course, if you have a 4K screen, don’t worry about the resolution and you can reduce this distance as you wish.
Finally, it is necessary to check the transportation route inside the house to install the device without problems and damage. The carton dimensions of 65 inch LG TVs are usually about 160 cm long, 95 cm wide, and 20 cm high. Before moving the TV, be sure to consider the size of the entrance to the house, the staircase and the size of the elevator.
Checklist before shipment and installation
To avoid physical damage, check the following before final purchase:
- Match the dimensions of the carton (average 160x97x20 cm) with the width of the door, staircase and elevator.
- In heavy models (QNED), the carrying should be done by two people so as not to put pressure on the panel.
- In the wall installation, the path of the cables and the distance from the power outlet should be specified in advance.
- In environments with limited ventilation (such as cabinets or closed walls), At least 10 cm distance behind the TV It is necessary for air circulation.
summary
65 inch LG TVs are in the range of 145×83 cm in terms of physical dimensions and are ideal for spaces of 30 to 40 square meters. Observing the viewing distance of 2 to 2.7 meters and choosing the right bracket based on VESA are two key factors to achieve a perfect viewing experience.
All in all, the balanced design, low thickness (especially in OLED models) and compatibility with global installation standards make 65-inch LG TVs one of the most accurate options in terms of proportions and ergonomics on the market.